|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| Cables
and connectors for shutter drivers Back to Uniblitz Back to Shutters |
| 510A Shutter Interconnect
Cable |
510F Shutter Interconnect
|
5F Connector (2-pack) |
5M Connector (2-pack) |
 |
 |
 |
 |
| •
5-pin Switchcraft in-line locking male connector to 5-pin Switchcraft
in-line locking female connector • designed for use with shutters equipped with 5-pin Switchcraft male connectors and shutter drivers such as the VCM-D1 • 3 metres |
• Female
to female interconnect cable for the VED24 shutter driver/controller
series • 5-pin Female molded Switchcraft connector to 5-pin Female molded Switchcraft connector • 3 metres |
• Female to male |
• Male to female |
| 710A Shutter Interconnect
Cable |
710C Shutter Interconnect
Cable |
710P Shutter Interconnect
Cable |
710R Handheld Remote Cable |
 |
 |
 |
 |
| •
5-pin Switchcraft in-line locking male connector to 7-pin WirePro
in-line female connector • designed for use with the VCM-D1 driver • 3 metres |
• 7-pin
in-line female connector to 7-pin in-line male connector |
• 7-pin,
in-line female connector to 7-pin, in-line male connector |
• hand-held
push-button shutter remote release • connects to select Uniblitz shutter drivers via BNC • ideal for the remote, manual, push-button operation of the VED24 or VCM-D1 • 3 metres |
710P Shutter Interconnect
Cable data sheet |
| 710R/F Foot Activated Remote
Cable |
7F Connectors |
7M Connectors |
810RJ Serial Cable |
 |
 |
 |
 |
| • foot-activated
shutter remote release that connects to select Uniblitz shutter drivers
via BNC. • ideal for the remote, manual, foot-activated operation of the VED24 or VCM-D1 • 3 metres |
• 7-Pin
Wirepro female connectors with a hood and cable clamp • used to interconnect a shutter terminated with its male counterpart to a user's drive controller system • Two 7F connectors in the set |
7-Pin Wirepro male connectors with a hood and cable
clamp used to interconnect a driver controller terminated with its female counterpart, to a shutter unit. • Two 7M connectors in the set |
• connects
the RS232-C input on the VCM-D1 to a RS-232 computer serial port • designed to connect a single VCM-D1 unit to a computer’s serial port. One 910RJF adapter is included • Can also be used to connect two or more VCM-D1s in a daisy-chain application • 3 metres |
| 910RS Serial Cable |
| .  |
| •
9-pin D-sub female to 9-pin D-sub male interconnect cable • designed to connect an RS232-C computer serial port to the RS232-C input of the VMM-D3 or VMM-D1 • 3 metres |
Need a price or more application information? Please
email Adept Turnkey or call our offices
Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne
(03) 9384 1775
|
If you like this page, please recommend and share it. |
||
| More | ||
