|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
|
PTU-D300E-EX Back to Accessories Back to Manufacturers |
  |
PTU-D300E-EX
Real-time control; built-in
Ethernet
Increased torque and durability through a higher-ratio,
all-stainless gear drive giving higher payload capacity.
The PTU-D300E-EX is a high-performance, real-time positioning
system for payloads up to 40.8 kg offering higher gear ratios
and all-stainless gear train that provide increased payload
capacities and superior long-term wear performance under
harsh duty cycles.
Made with a low parts count and highly integrated
design providing excellent system reliability,
the PTU-D300E-EX offers very high precision positioning
and speed control. The stepper motor/worm gear design
supports micro-stepping and is based on a rigid bearing and mechanical
design to ensure solid repeatable motion. The unit is
highly-programmable with user parameters for range of motion, speed, acceleration,
power consumption and the real-time command interface supports
advanced applications such as video tracking.
Designed to be simple to integrate, the PTU-D300E-EX
supports any type of single or multi-part payload through a flexible bracketing
system of top and/or side mounting and its open platform provides the
flexibility needed while minimizing development and
integration effort.
The PTU-D300E-EX has been proved valuable in a wide range of mission-critical
applications for positioning of cameras, lasers, antennas,or other instruments
in both fixed and mobile environments. It is designed for high duty cycles
and reliable operation 24/7 in harsh all-weather environments.
| Key features - PTU-D300E-EX | |
| • Large payload capacity to 90 Lbs | |
| • Extremely precise positioning (to 0.0064° with microstep) | |
| • Wide range of pan speeds 0.0064°/sec to 22° for smooth, precise control | |
| • 360-continuous pan (with slip-ring option) | |
| • Precise, real-time control of position, speed and acceleration | |
| • Rigid worm gear design (no belts/pulleys) provides steady positioning in windy environments | |
| • Solid and vibration-tolerant for vehicle-mounted applications | |
| • Single connector for power, control, payload signals | |
| • Fully sealed for outdoor/marine applications (IP67). Wide temperature range with no heater required | |
| Model | PTU-D300E- EX |
| Pan/tilt performance (standard) | |
| Maximum payload* | 41 kg side mount; 27.2 kg top mount |
| Maximum speed** | 22°/second (both side and top mount) |
| *
Over-the-top
payload assumes COG 15.2 cm from tilt axis; over the side payload
assumes balanced COG. ** Maximum speed may depend on exact payload inertia and input voltage. |
|
| Input Voltage | Unregulated 12-30 VDC (fastest performance & torque @ 30 VDC) |
| Payload mounting | Side, top, dual-side+top |
| Pan speed | min .0064°/second |
| Tilt speed | min .0064°/second |
| Tilt Range (approx) | +30º to -90º from upright (120º range) (up to +/-90º with single side mount) |
| Pan range (approx) | Programmable up to 360° continuous |
| Tilt position resolution | .0064° (with microstepping) |
| Pan position resolution | .0064° (with microstepping) |
| Acceleration/Deceleration | Programmable, on-the-fly speed and position changes |
| Duty cicle | Up to 100% duty cycle, or 3-5 million cycles |
| Weight | 11.8 kg (standard bracket: .5 kg) |
| Dimensions | Pan/Tilt Only: 33 cm (h) × 18 cm (w) ×21.7 (d) (without brackets) |
| Operating temperatures | -30°C to 70°C (no heaters) |
| Environmental | IP67; RoHS Compliant; 100% relative humidity, non condensing |
PTU-D300E-EX
data sheet|
If you like this page, please recomend and share it. |
|||
| Google+ | More | ||
